라즈베리파이 카메라를 확장보드하나에 4대 까지 연결 가능
확장보드를 4 개 적용하면 최대 16개 카메라를 하나의 보드에서 연결 가능
Raspberry Pi multi camera adapter module UC-627
동일한 모델 사진은 위를 참고하시고, 참고로 유사모델 링크 입니다
https://www.arducam.com/product/multi-camera-v2-1-adapter-raspberry-pi/
[포함되는 내용]
1) Raspberry Pi multi camera adapter module UC-267 .. 1개
2) 필름 케이블 15cm... 1개 (사진상의 짧은 케이블이 15cm)
3) 필름 케이블 75cm... 1개 (사진 상의 긴 케이블이 75cm)
4) 보드 지지대 (5x2)핀 (측면사진 참조)
- 이 상품에 라즈베리파이 보드 자체는 포함되지 않습니다.
- 이 상품에 라즈베리파이 카메라는 자체는 포함되어있지 않습니다.
[ 배송비]
- 별도 입니다.
[보유 수량]
총 16개 있습니다.
[ 특징 ]
라즈베리 파이 멀티 카메라 아답터 모듈입니다.
라즈베리 파이에 장착된 한개의 CSI 카메라 포트에 최대 4개의 카메라를 연결할 수 있게 디자인된 제품입니다.
아답터보드는 또한 4개까지 서로 적재할 수 있어 총 16개의 카메라를 연결할 수 있습니다. (이 때 보드의 수는 1+4 = 5개 입니다)
보드 윗면에 카메라 A,C 를 필름케이블로 연결할 수 있고, 보드 아래면에 B,D 카메라를 연결 할 수 있어 총 4개 연결이 가능
다수의 연결된 카메라는 프로그램에서 식별가능하여,
하나의 보드로 에서 동시에 4장의 사진을 획득 할 수 있습니다. (ms이하의 delay)
라즈베리파이 2B에서 테스트 되었습니다. (Pi A/B/B+ and Pi 2, Pi2B 지원)
프로젝트를 라즈베리파이 2B로 진행하여야 해서 Pi 2B에서는 확실히 동작된 는 것을 확인 했습니다.
Pi 2B 이상의 모델에서는 테스트 해보지는 못했습니다.
DIP 스위치 세팅은 첨부문서에 자세히 설명되어 있습니다.
[샘플 데모 코드]
첨부 링크의 문서에 예시가 있습니다
[특징]
Accommodate 4 Raspberry Pi cameras on an multi camera adapter board
Stackable and maxim cascade 4 adapter boards
3 GPIOs required for multiplexing on one adapter board, 5 GPIOs for two adapter board, 9 GPIOs for four adapter board
All camera ports are FFC (flexible flat cable) connectors
DIP switches for easy stack up configuration
Support Raspberry Pi A/B/B+ and Pi 2
[규격 및 가이드 첨부 파일 참조 ]
http://www.arducam.com/downloads/RaspCAM/RaspberryPi_Multi_Camera_Adapter_Module_UG.pdf
[유사모델]
모델이 약간 차이가 있으나 기본 기능과 설명은 아래의 링크에 설명되어 있습니다.
https://m.blog.naver.com/PostView.naver?isHttpsRedirect=true&blogId=ubicomputing&logNo=220713952946
https://www.arducam.com/product/multi-camera-v2-1-adapter-raspberry-pi/
https://www.uctronics.com/multi-camera-adapter-bundle-kits-compatible-for-official-raspberry-pi-v2-multiple-adapter-v2-1-and-4-modified-v2-camera-module.html